TOMZN TO219G 2P 80A Manual Transfer Switch (MTS) – Slim Changeover Switch for Generator & IPS

TOMZN TO219G 2P 80A Manual Transfer Switch (MTS) – Slim Changeover Switch

The TOMZN TO219G is a 2-pole 80A manual transfer switch (also called an MTS or manual changeover switch). It lets you move your load between two power sources by hand – for example city power (grid) and a generator, or grid and an IPS / solar inverter.

Why choose the TOMZN TO219G MTS?

• 80A, 2-pole: switches both Live and Neutral, enough for a full home, shop or small office.
• Safe I – 0 – II handle: the center OFF position means Source I and Source II are never connected together, protecting your generator and inverter from back-feed.
• Slim DIN-rail design: mounts on a standard 35mm DIN rail, so it fits inside your existing distribution board (DB box).
• Certified quality: AC-22A category, Ui 690V, built to IEC/EN 60947-3 and GB/T 14048.3, CE marked.

Typical uses

• City power ↔ generator changeover
• City power ↔ IPS / inverter / solar backup
• Homes, flats, shops, offices and small factories
• Separating essential loads such as lights, fans, pumps and CCTV

How it works

Position I connects the load to the first source (e.g. grid), position II to the second source (e.g. generator), and 0 is OFF. Always move the handle through OFF when changing sources.

বাংলায় সংক্ষেপে

TOMZN TO219G 80A ২-পোল ম্যানুয়াল ট্রান্সফার সুইচ (MTS / চেঞ্জওভার সুইচ) দিয়ে বিদ্যুৎ লাইন ও জেনারেটর বা IPS-এর মধ্যে হাতে সুইচ করা যায়। মাঝখানে OFF পজিশন থাকায় দুটি লাইন কখনো একসাথে যুক্ত হয় না। DIN রেইলে বসানো যায়, তাই বাসা বা দোকানের ডিবি বক্সেই ফিট হয়।

Installation note

Please have a qualified electrician install the MTS. Make sure the total connected load is within 80A and use cable of the correct size.